6" to 8" borehole to a depth of 500 mtr (1500 ft) with DTH

Truck mounted Rig with power from Truck Engine /deck Engine

Rotation with direct circulation, nucleus destruction with bleeding by air, water, foam by

DTH Rotary using drag bit / rock roller bit in over burden.

Max Capacity – 20 tons (44,000 lbs)

Height – 8 mtr (27 ft)

Rod handling capacity – 6.1 mtr (20 ft)

By means of Hydraulic cylinder and wire rope Reeving Ratio 1:3

Max Pull up force      - 10750kgs (20240 lbs)

Max Pull up speed     - 39 mtr/min (118 ft/min)

Max Pull down force - 6318 kgs (13900 lbs)

Max Pull down speed – 50mtr/min (167ft/min)

210 kg / cm2 / (3000 psi)

90 GPM fin type cooler fan drive through hydraulic motor

Rotary head powered by one hydraulic motor

Max Torque    -    303 kg-mtr (26,000 inch - lbs)

Max Speed      -   0 to 150 rpm

Four Hydraulic jacks, front two are box type

Triplex reciprocating pump powered by hydraulic motor

To open the drill joints hydraulic break out wrench will be provided

Remote controlled hydraulic pilot rod handling arrangement directly to and from the rod rack

fitted on either side of the platform. Rod rack can hold total of 45 nos of 6 mtr drill pipes 4 1/2" OD which can be raised and lowered with Hydraulic cylinder. X-Y-Z axis movement of the rod is done with hydraulic cylinder and motor control. The rod is carried from either rack at one time   and then moved into position under the rotary head for easy coupling and decoupling. Thus reducing burden on labour.